Purple Smart Weighted Hula Hoop
Assemble your smart hula hoop in under 2 minutes. Follow the steps below — or watch the quick video walkthrough.
24
Detachable segments
1.5 kg
Adjustable weight ball
2 × AAA
Smart timer batteries
Assembly in 6 steps
Lay everything on a flat surface before you begin.
Unbox and check the parts
You should have 24 curved segments, 1 weighted ball with a sliding track, 1 smart timer module, and 2 AAA batteries. Lay all segments in a row in the same orientation.
Connect the segments
Push the ball end of one segment firmly into the socket of the next until you hear a soft click. Continue until all 24 segments are linked into one long chain.
Form the circle
Bring the two ends of the chain together and click them into place to form a closed ring. The hoop should hold its shape without gaps.
Mount the weighted ball
Slide the ball housing onto any segment along its built-in track. Twist the locking ring clockwise to fix it in position. Move it later to balance the hoop to your waist.
Install the smart timer
Open the back cover of the timer module, insert 2 AAA batteries (matching + / − marks), close the cover and clip the module onto the dedicated segment marked with the screen cutout.
Power on and start
Press the M button to switch between Time, Count and Calorie modes. Long-press to reset. Place the hoop around your waist, push it into a spin, and start training.
Video walkthrough
A short visual guide showing the full installation.
Troubleshooting
Check that the ball joint is clean and aligned straight. Apply firm, even pressure — do not twist while pushing.
Re-seat the AAA batteries and confirm polarity. Press M once to wake the screen from sleep.
Reposition the weighted ball opposite to where the hoop drops, and start with slower, wider hip circles.
Add or remove 2 segments at a time (always an even number) to adjust the diameter to your waist.